B35 ShoeGlue™

Super-active and super-strength, the new B35 Shoe Glue bonds leather-to-leather, leatherette, polyurethane foam and composition inner sole surfaces.


1. Stir well before using.
2. Thoroughly clean surfaces to be bonded.
3. Apply a uniform film of adhesive by brush/roller to both surfaces so that a wet thickness of 3-4mils is achieved.
4. Allow the solvent to flash off (approximately 5 minutes) then combine surfaces while the adhesive is still tacky.
5. After mating the surfaces, apply as high a pressure as is practical within the limitations of the material bonded. The pressure need only be momentary, but should be uniform over the surface.
6. Clean brushes or other application equipment with trichloroethylene.
7. Avoid inhaling vapor. Ensure adequate ventilation when in use.


Flammable liquid. Keep away from heat, sparks and flame. Keep container closed. Use with adequate ventilation. In case of fire, use water spray, foam, dry chemical or CO2. Store in the original closed container out of reach of children.


Printer-friendly product description: B35 Shoe Glue (PDF)