Conad™

An industrial grade contact cement, Conad bonds laminate, particleboard, plywood, hardboard, steel and aluminum.

HOW TO USE

1.Stir well before using.
2. Thoroughly clean surfaces to be bonded.
3. Apply a uniform film of adhesive by brush/roller to both surfaces so that a wet thickness of 3-4mils is achieved.
4. Allow the solvent to flash off (approximately 5 minutes) then combine surfaces while the adhesive is still tacky.
5. After mating the surfaces, apply as high a pressure as is practical within the limitations of the material bonded. The pressure need only be momentary, but should be uniform over the surface.
6. Clean brushes or other application equipment with trichloroethylene.
7. Avoid inhaling vapor. Ensure adequate ventilation when in use.

PRECAUTIONS

Flammable liquid. Keep away from heat, sparks and flame. Keep container closed. Use with adequate ventilation. In case of fire, use water spray, foam, dry chemical or CO2. Store in the original closed container out of reach of children.

SIZES AVAILABLE

Printer-friendly product description: Conad (PDF)